Equations are not being displayed properly on some articles. We hope to have this fixed soon. Our apologies.

Bagadi, R. (2016). TRL Stable Configuration Engineering Of Any Aspect Primality Of Concern. (Universal Engineering Series). ISSN 1751-3030. PHILICA.COM Article number 775.

ISSN 1751-3030  
Log in  
Register  
  1138 Articles and Observations available | Content last updated 21 July, 12:05  
Philica entries accessed 3 159 529 times  


NEWS: The SOAP Project, in collaboration with CERN, are conducting a survey on open-access publishing. Please take a moment to give them your views

Submit an Article or Observation

We aim to suit all browsers, but recommend Firefox particularly:

TRL Stable Configuration Engineering Of Any Aspect Primality Of Concern. (Universal Engineering Series). ISSN 1751-3030

Ramesh Chandra Bagadiunconfirmed user (Physics, Engineering Mechanics, Civil & Environmental Engineering, University of Wisconsin)

Published in engi.philica.com

Abstract
TRL Stable Configuration Engineering Of Any Aspect Primality Of Concern. (Universal Engineering Series). ISSN 1751-3030.

Author:
Ramesh Chandra Bagadi
Founder, Owner, Co-Director And Advising Scientist In Principal
Ramesh Bagadi Consulting LLC (R042752)
Madison, Wisconsin-53715, United States Of America.

Email:
rameshcbagadi@uwalumni.com

Permanent Home Address:
MIG-905, Mithilapuri Colony,
VUDA Layout, Madhurawada, Visakhapatnam 530 041,
Andhra Pradesh State, India.

Telephones:
+91-9440032711, +91-7702721450, +91-891-2501619 (Land Line)

Universal Reach Address:
U8.0 of the stated Spaces in [0]

Article body

 

Information about this Article
This Article has not yet been peer-reviewed
This Article was published on 22nd September, 2016 at 13:56:06 and has been viewed 718 times.

Creative Commons License
This work is licensed under a Creative Commons Attribution 2.5 License.
The full citation for this Article is:
Bagadi, R. (2016). TRL Stable Configuration Engineering Of Any Aspect Primality Of Concern. (Universal Engineering Series). ISSN 1751-3030. PHILICA.COM Article number 775.


<< Go back Review this ArticlePrinter-friendlyReport this Article


1 Author comment added 11th November, 2016 at 12:51:51

TRL Stable Configuration Engineering Of Any Aspect Primality Of Concern. (Universal Engineering Series). ISSN 1751-3030.
Addendum 1:

Author:
Ramesh Chandra Bagadi
Founder, Owner, Co-Director And Advising Scientist In Principal
Ramesh Bagadi Consulting LLC (R042752)
Madison, Wisconsin-53715, United States Of America.

Email:
rameshcbagadi@uwalumni.com

Permanent Home Address:
MIG-905, Mithilapuri Colony,
VUDA Layout, Madhurawada, Visakhapatnam 530 041,
Andhra Pradesh State, India.

Telephones:
+91-9440032711, +91-7702721450, +91-891-2501619 (Land Line)

Universal Reach Address:
U8.0 of the stated Spaces in [0]

One can note that when the given Aspect Primality of concern is Slated in Stable Configuration at the Maximal Order Dimension Of Space Needed, the Aspect Primality’s Total Norm calculated along all the Orders Of Space Dimensions should be a Minimum Possible Value. Furthermore, the Maximal Order Dimension of Space can be Calculated by firstly noting every Element of the Aspect Primality Element Set Value, i.e., S(j), for all j ordered by the Aspect Primality of concern, and each of them should be Slated as some K(S(j))th Prime Metric Element Of Some Positive Integral Dimension Order R(K(S(j))) Universal Sequence Of Primes. Then the Maximum Order among the Values R(K(S(j))) is the Maximal Order Dimension Of Space Needed.
Also, one can note that because of the Influence of the Star or Galaxy or Universe or just the Interstitial Galactic Space wherein the Aspect (Primality Slated in Stable Spatial Configuration) is Permeating in, it is always under Pressure to Evolve due to the aforementioned Influence of the Star or Galaxy or Universe or just the Interstitial Galactic Space’s Universal Recursional Gradient Intensity Field. Hence, we can Slate the Universal Recursion Scheme of Universal Recursional Gradient Intensity Field of the Star or Galaxy or Universe or just the Interstitial Galactic Space of concern and can Slate it in the Basis of Stable Spatial Configuration. Once, we do this, we can now Slate the Aspect Primality in Stable Spatial Configuration taking care of this Dynamic Aspect of concern, such that we know how its Stable Spatial Configuration is Changing, i.e., the Change Function. One can even use the Star or Galaxy or Universe or just the Interstitial Galactic Space’s Universal Recursional Gradient Intensity Field Limit Bounds for considering this aforementioned Pressure Effect in Totality.

Thank You.
Regards
Ramesh Chandra Bagadi




Website copyright © 2006-07 Philica; authors retain the rights to their work under this Creative Commons License and reviews are copyleft under the GNU free documentation license.
Using this site indicates acceptance of our Terms and Conditions.

This page was generated in 0.3367 seconds.