Equations are not being displayed properly on some articles. We hope to have this fixed soon. Our apologies.

Sparavigna, A. (2016). A skyscraper as a huge diffraction grating. PHILICA.COM Article number 737.

ISSN 1751-3030  
Log in  
Register  
  1270 Articles and Observations available | Content last updated 13 December, 05:46  
Philica entries accessed 3 486 336 times  


NEWS: The SOAP Project, in collaboration with CERN, are conducting a survey on open-access publishing. Please take a moment to give them your views

Submit an Article or Observation

We aim to suit all browsers, but recommend Firefox particularly:

A skyscraper as a huge diffraction grating

Amelia Carolina Sparavignaunconfirmed user (Department of Applied Science and Technology, Politecnico di Torino)

Published in engi.philica.com

Abstract
The paper is showing how the surface of a building can become a huge diffraction grating, which can create diffracted beams of colored light. The case here discussed is that of the Intesa Sanpaolo Tower in Torino.

Article body



A skyscraper as a huge diffraction grating

 Amelia Carolina Sparavigna

Politecnico di Torino

 The paper is showing how the surface of a building can become a huge diffraction grating, which can create diffracted beams of colored light. The case here discussed is that of the Intesa Sanpaolo Tower in Torino.

 

The Torre Intesa Sanpaolo in Turin is the headquarters for the homonymous banking group. It is the second tallest building in the city, after the Mole Antonelliana. The tower was planned by Renzo Piano, who described it as a "bioclimatic building", because it is naturally ventilated and cooled. A substantial amount of its power requirement is generated by photovoltaic panels [1-4].

 

 

Figure 1: A façade of Intesa Sanpaolo Tower. Note the grid in front of it.

 

As we can see in the Figure 1, the surface of the building is made of windows which are covered by a fine grid. Therefore, we have a structure which is like a huge mirror covered by a grating, which actually becomes a diffraction grating. The light of the sun (white light) arrives on the face of the building and is reflected by it in several beams. One is composed of white light, the others are made of dispersed coloured light. Let us remember that a  diffraction grating is an optical device used to disperse the white light into its constituent optical frequencies. The simplest possible grating is a glass substrate with a series of parallel, equally spaced lines on its front surface [5,6].

Let us consider the Figure 2. In the upper part it is represented the diffraction grating (in our case, the façade of the skyscraper with its windows and the grid in front of them). The sun hits the building and a beam of white light and colored beams are produced.

 

Figure 2:  The upper part  is representing the diffraction grating. The white light hits the grating and a beam of white light and coloured beams are produced (see also https://www.quora.com/What-is-a-diffraction-grating).

 

To the author's best knowledge, the fact that the surface of a building can behave like a diffraction grating is not mentioned in literature or in the web. Here, in the Figures 3 and 4, we can see the effect as seen from the southern side of the tower. Only the central part of this façade is covered by the grid. The direct view of the colours is much better than that shown by these images from a camera. The phenomenon is even better is it is observed for the façade shown in the Figure 1.

 

Figure 3: South side of the building.

 

Figure 4: Diffracted colored beams from the part of the south façade which is acting like a diffraction grating. The direct view of the colors is much better than that shown by these images.

 

References

[1]Barus, T., Tizzano, A., & Vulpio, D. (2008). Torino Vertical Towers (Doctoral dissertation, Politecnico di Torino).

[2] Di Stefano, L. (2009). Aspetti Tecnologici e Paesaggistici di un Edificio Alto in un Tessuto Urbano Consolidato (Doctoral dissertation, Politecnico di Torino).

[3] Carpinteri, A., Lacidogna, G., & Cammarano, S. (2013). Structural analysis of high-rise buildings under horizontal loads: A study on the Intesa Sanpaolo Tower in Turin. Engineering Structures, 56, 1362-1371.

[4] Corres-Peiretti, H., Dieste, S., León, J., Pérez, A., Sánchez, J., & Sanz, C. (2012). New Materials and Construction Techniques in Bridge and Building Design. In Innovative Materials and Techniques in Concrete Construction (pp. 17-41). Springer Netherlands.

[5] Born, M., & Wolf, E. (2000). Principles of optics: electromagnetic theory of propagation, interference and diffraction of light. CUP Archive.

[6] Loewen, E. G., & Popov, E. (1997). Diffraction gratings and applications. CRC Press.



Information about this Article
This Article has not yet been peer-reviewed
This Article was published on 6th September, 2016 at 17:42:45 and has been viewed 919 times.

Creative Commons License
This work is licensed under a Creative Commons Attribution 2.5 License.
The full citation for this Article is:
Sparavigna, A. (2016). A skyscraper as a huge diffraction grating. PHILICA.COM Article number 737.


<< Go back Review this ArticlePrinter-friendlyReport this Article


1 Author comment added 7th September, 2016 at 18:08:46

See please the revised version of this paper at the

Philica new article. Here the link

http://www.philica.com/display_article.php?article_id=740

You can find also a sequence of images of the phenomenon


2 Author comment added 8th September, 2016 at 07:38:47

I have revised the paper, adding more references and some details on the double-skin facade of the building. It is the outer skin which is producing the dispersion of light in a “diffraction grating” effect.
See please the layout of the paper given at the PHILICA article 774
http://www.philica.com/display_article.php?article_id=744




Website copyright © 2006-07 Philica; authors retain the rights to their work under this Creative Commons License and reviews are copyleft under the GNU free documentation license.
Using this site indicates acceptance of our Terms and Conditions.

This page was generated in 0.3265 seconds.